Garage Equipment Money Savers’ Class IV and Class VII approved vehicle inspection pits are supplied completely fitted out and ready for your own installation. GEMS Class VI/VII basic pits supplied without services.

Price:

POA

MOT Class IV and Class VII Approved

For more product information, or to discuss your garage equipment needs in more detail, please telephone 01823 617 767 or email us.

Important information

Only the DVSA / VOSA can authorise an appointment as a MOT or approve any equipment used in an existing MOT Bays. DO NOT BUILD or CONVERT PREMISES OR BUY MOT TESTING EQUIPMENT until you apply on a VT-01 Application form and get written authorisation.

Telephone us on 01823 617 767 for more information and to discuss your MOT Bay plans.

  • 7.5m long x 900mm wide x 1.65m deep
  • Approved to VOSA – DVSA specifications
  • 5mm plate side walls with 6mm braced Durbar floor sloping to central sump with cover plate
  • Removable Durbar staircase to one end and escape ladder at the other end
  • 150mm x 75mm channel jacking rails
  • Bolt in top rail sections for installation of jack rail
  • Raised side tracks for step plate
  • Internal trunking to accept lighting and 110v socket
  • Exterior finished in black container paint- Internally de-greased and abraded prior to three coats of zinc phosphate white and finished in white gloss enamel
  • Supplied as both bolt to base or suspended pit
  • Vehicle inspection pits are manufactured in the UK to the very highest standards
  • Supplied and delivered in one piece ready for a quick and trouble free installation
  • Manufactured from mild steel sheets, MIG welded to form water tight sumps
  • All pits are complete with lighting and electrics
  • Integral straight jacking beam rail included
  • Fully sealed to stop the ingress of water and gasses or the escape of harmful fluids
  • All welding by coded welders to EN1090 part 2
  • Structural calculations, certified, CE marked if required
  • Supply, fit and wire 7 x 1.5m IP56 light units and 110v socket - £828.00 + VAT
  • Supply & fit steel airline with one Q.R take off - £120.00 + VAT
  • Class 4/7 play detector tray + 4mm Durbar floor plate for opposite side of pit - £280.00 + VAT
  • Radius plate trays (pr) - £120.00 + VAT
  • Class 4 - Fabricated brake tester cassette (3mm steel, painted) - £300.00 + VAT / Pre galvanized (Optional) - £300.00 + VAT
  • Split bed - brake tester- for adaption of cassette and pit walls to suit brake tester - £289.00 + VAT
  • Pit safety drive on guide rails for top of pit fitting (painted yellow) - £700.00 + VAT
  • Raised aluminium ‘step up’ platform 6mm and braced - £193.00 + VAT
  • Recessed pit wall compartments for storage / tools / pump etc.:
    1. Size 1000mm long x 800mm deep x 1150mm high - £385.00 + VAT (each)
    2. Size 1500mm long x 800mm deep x 1150mm high - £499.00 + VAT (each)
    3. Size 2000mm long x 800mm deep x 1150mm high - £620.00 + VAT (each)
    4. Straight side tunnel entrance with steps up to 2.9m long with 30mm cover plate allowing full working use of pit length - £3,999.00 + VAT (each)
    5. ‘L’ shaped tunnel with steps up to 2.9m long with 30mm cover plate allowing full working use of pit length - £4,500.00 + VAT (each)
    6. Straight side tunnel entrance with ladder allowing full working use of pit length - £2,900.00 + VAT (each)
    7. Aluminium pit covers- 6mm thick 5 bar aluminium braced to underside with 75x6 flat aluminium 50mm overlap to each side of pit. Made in 2m sections - £ 190.00 + VAT (per running metre)
  • Ground work - Pit excavation, pit installation & laser alignment, concrete pour and finish to final floor level - POA
  • ASTV2 shaker plates - 1x SVP230111 – SHERPA/PD Class 4/7 sherpa hydraulic pit play detector complete with hoses and wireless remote control - £4,495.00 + VAT
  • Part No. HPJ2.8 - 2.8 tonne manually operated jacking beam Class VII, supplied as standard with finger guards for CE marking. Complete with 1700mm double extending top beam with basic flat or hook type roller support arms 1333 or 1334 - £1,305.00 + VAT
  • Part No. HPJ2.8 – 2.8 tonne air operated jacking beam Class VII, supplied as standard with finger guards for CE marking. Complete with 1700mm Double extending top beam with basic flat or hook type roller support arms 1333 or 1334 - £1,486.00 + VAT
  • One operative on site for one day to laser level pit and oversee first pour of concrete - £450.00 + VAT