GEMS can manufacture vehicle inspection pits for MOT and ATF testing for cars, trucks, PSV and trailers; available from 8m – 30m and designed to your own specifications. Supplied completely fitted out and ready for your own installation. Prices for pits supplied with lighting, airline and 110v socket.
Price:
POA
For more product information, or to discuss your garage equipment needs in more detail, please telephone 01823 617 767 or email us.
Important information
Only the DVSA / VOSA can authorise an appointment as a MOT or approve any equipment used in an existing MOT Bays. DO NOT BUILD or CONVERT PREMISES OR BUY MOT TESTING EQUIPMENT until you apply on a VT-01 Application form and get written authorisation.
Telephone us on 01823 617 767 for more information and to discuss your MOT Bay plans.
- Commercial vehicle inspection pit standard details
- 1000mm wide x 1.65m deep
- 5mm pressed steel recessed side walls. 6mm pressed durbar floor sloping to central sump
- Access Stairs one end, straight or cranked ships ladder. Rail mounted if required. Note: Access Stairs take up approx. 1.5m of total pit length (optional side tunnel entrance POA)
- 150mm x 75mm deep captive jacking beam with safety stops
- Provision for secondary floor level at 1400mm complete with removable non-slip gratings
- Spillage sump central
- Airline – ½” BSP galvanized tube with 2 double outlets 90/110 series
- Lighting – to suit pit length -1.5 240v single tube luminaries Zone 2
- 1 x Low voltage socket (transformer not supplied)
- Exterior black container paint finish Internal de-greased and abraded prior to three coats of zinc phosphate white and finished in gloss white enamel
- Vehicle inspection pits are manufactured in the UK to the very highest standards
- Supplied and delivered in one piece ready for a quick and trouble free installation
- Manufactured from mild steel sheets, MIG welded to form water tight sumps
- All pits are complete with lighting and electrics
- Integral straight jacking beam rail included
- Fully sealed to stop the ingress of water and gasses or the escape of harmful fluids
- All welding by coded welders to EN1090 part 2
- Structural calculations, certified, CE marked if required
- Supply and fit 11 x 1.5m IP56 light units – 2 x 110v sockets and termination boxes - £1,560.00 + VAT
- Air hose brackets and pipe complete with 2 x take off points - £150.00 + VAT
- For each additional metre of pit length required - £950.00 + VAT
- CV play detector trays (per pr) - £450.00 + VAT
- CV radius plate holder trays (pr) - £150.00 + VAT
- Class IV.VII play detector tray with H/D 10mm Durbar cover plate - £399.00 + VAT
- Hand rails for tunnel exits, finished in yellow enamel (per pair) - £575.00 + VAT
- Pair of commercial brake tester hand rails, finished in yellow enamel - £197.00 + VAT
- Aluminium step up platform 1m x 1m (6mm thick) with under bracing - £193.00 + VAT
- Aluminium pit bridge with aluminium hand rails - £475.00 + VAT
- Aluminium pit covers- 6mm thick 5 bar aluminium braced to under side with 75x6 flat aluminium 50mm overlap to each side of pit. Made in 2m sections (per running metre) - £190.00 + VAT
- Nozzles and exterior ductwork for PET regulations - P.O.A
- Ground work - pit excavation, pit installation and laser alignment, concrete pour and finish to final floor level - P.O.A
